T Slot Measurement

Sizes and Prices T-track is available in lengths from 1 ft. And averages about $4.50 per lineal foot. It is usually sold in 1- or 2-ft. Increments, but some brands can be special ordered to a specific length. Most T-tracks are approximately 3/4 in. Wide with a thickness of either 3/8 or 1/2 in. Micro-fine guide holes and slots at every 1/16', 1/32' and 1/64' scale position instantly locate your sharp pencil or scribe at the exact measurement with zero uncertainty and no eye strain! The Metric versions include marking holes and slots at every 1mm, 1/2mm and 1/4mm. Our Professional T-Rules even offer marking holes every 1/100'. In this example, the T-Slot Block being used to hold mulitple extrud-ed aluminum frames. The machine table shown is a small 34 X 16 size table. The extruded aluminum is 20mm X 20mm X 762mm. On the T-Slot Block, work stops, and clamps are pre positioned. Remove the work pieces and the T-Slot Block can be removed from. These 36' plastic T-track tape measure inserts fit any universal T-Track to give you accurate measurements along your fence in increments of 1/16'. Use them for fast, foolproof adjustments of your fence stops or for general measuring. Ideal for use with all Universal T-Tracks, Multi Tracks, and Double T-Track Fence Caps. T-slot sensors are 24VDC and available in PNP and NPN output transistor logic with NO (normally open) or NC (normally closed) configuration. Sensors and mating cordsets meet NEMA 1, 3, 4, 6P and IEC IP67 ratings. Macron T-slot Sensors can provide users with limit, position or output signaling back to a control system.

T-slot structural framing is a framing system consisting of lengths of square or rectangular extruded aluminum, typically 6105-T5 aluminium alloy, with a T-slot down the centerline of one or more sides. It is also known as 80/20 framing, after the company 80/20, Inc., one of the prominent T-slot framing brands, the name of which is based on the 80/20 principle. While there is no published standard defining this framing system, manufacturers have settled into two categories of product comprising several series each that is generally intercompatible across manufacturers.

Profiles[edit]

T-slot framing is divided into metric and fractional (imperial) categories. The T-slot is always centered along the long-axis of the piece. Pieces are available in each series with a square cross-section. Rectangular cross sections are available as well which measure x by 2x (where x is the defined width) - e.g. 40mx80mm for 40 series.

• CAD model of a rotating T-nut used with aluminium T-slots/ T-track/ extrusions

• T-nut (red) installed in a T-Slot

See also[edit]

References[edit]

T Slot Measurements

T Slot Measurements

• Products
  • Linear Robotics

    LINEAR ROBOTICS

    Multi-axis automation products including H-Bots, T-Bots, Gantries, and Cartesian Robots. Motion solutions for every market.

    CHOOSE YOUR ORIENTATION

  • Belt Driven Actuators

    BELT DRIVEN ACTUATORS

    Linear actuators offer horizontal and vertical motion with travel up to 500 feet, speeds up to 600 in/sec., and can accurately handle loads up to 10,000 lbs.

    CHOOSE YOUR MODEL

  • Screw Driven Actuators

    SCREW DRIVEN ACTUATORS

    Simple and economical, screw driven actuators are highly modifiable for different applications and perfect for lighter loads and high accuracy positioning.

    CHOOSE YOUR MODEL

  • Specialty Actuators

    SPECIALTY ACTUATORS

    Engineered Products for Specific Applications.

    CHOOSE YOUR MODEL

  • Robotic Transport Units

    Robotic Transport Units

    Using a novel, flexible belt based “rack and pinion” design and structural aluminum MacFRAME components, our Robotic Transport Units (RTU) can handle a wide variety of lengths and payloads.

    CHOOSE YOUR MODEL

  • Gearboxes, Tools,
    Sensors &
    Replacement Parts